LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2017 >> Challenger SXT Plus >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Engine Cooling System >> Engine >> Fan, Cooling >> Installation >> 6.4L Dual Fan

6.4L Dual Fan

GC0144322Courtesy of CHRYSLER GROUP, LLC
  1. Install the fan blade (4) to fan motor. Tighten nut (3) to the proper torque specifications. Refer to TECHNICAL SPECIFICATIONS .
  2. Install the fan motor assembly to the shroud (6). Tighten the nut (3) to the proper torque specifications. Refer to TECHNICAL SPECIFICATIONS .
  3. Route the fan motor wiring harness (5) through the fan shroud (6).
    GC0144489Courtesy of CHRYSLER GROUP, LLC
  4. Install the cooling fan assembly (1) into the lower radiator mounts (2).
    GC0144533Courtesy of CHRYSLER GROUP, LLC
  5. Install cooling fan mounting bolts (2). Tighten to the proper torque specifications. Refer to TECHNICAL SPECIFICATIONS .
  6. Connect the cooling fan wire harness connector (1).
    GC0148460Courtesy of CHRYSLER GROUP, LLC
  7. Install the upper radiator hose (2).
  8. Install the oil cooler supply line (4) to the thermostat housing.
  9. Install the throttle body. Refer to 6.4L - THROTTLE BODY, INSTALLATION .
  10. Install the air cleaner body. Refer to BODY, AIR CLEANER, INSTALLATION .
  11. Fill the cooling system. Refer to STANDARD PROCEDURE .
  12. Operate the engine until it reaches normal operating temperature.
scientia non olet · About LEMON Manuals