LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2017 >> Challenger SXT Plus >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Engine Cooling System >> Engine >> Fan, Cooling >> Installation >> 3.6L Dual Fan

3.6L Dual Fan

GC0144322Courtesy of CHRYSLER GROUP, LLC
  1. Install the fan blade (4) to the fan motor. Tighten the nut (3) to the proper torque specifications. Refer to TECHNICAL SPECIFICATIONS .
  2. Install the fan motor assembly to the shroud (6). Tighten nut (3) to the proper torque specifications. Refer to TECHNICAL SPECIFICATIONS .
  3. Route the fan motor wiring harness (5) through the fan shroud (6).
    GC0144489Courtesy of CHRYSLER GROUP, LLC
  4. Install the cooling fan assembly (1) into the lower radiator mounts (2).
    GC0144533Courtesy of CHRYSLER GROUP, LLC
  5. Install the cooling fan bolts (2) and tighten to the proper torque specifications. Refer to TECHNICAL SPECIFICATIONS .
  6. Connect the cooling fan wire harness connector (1).
  7. Install the air cleaner body. Refer to BODY, AIR CLEANER, INSTALLATION .
  8. Connect the negative battery cable.
  9. Operate engine until it reaches normal operating temperature.
scientia non olet · About LEMON Manuals