Connector Terminal Removal

WARNING: This page is about a different car, the 2015 RAM ProMaster 3500, 2015 RAM ProMaster 2500, and 2015 RAM ProMaster 1500. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Removal Of Dress Cover

Courtesy of CHRYSLER GROUP, LLC

1 - DRESS COVER

2 - CONNECTOR LOCK

3 - CONNECTOR

Disconnect battery.
Release Connector Lock (2).
Disconnect the connector (3) being repaired from its mating half/component.
Remove the dress cover (if applicable) (1).

Fig 2: Connector Secondary Terminal Lock
Courtesy of CHRYSLER GROUP, LLC

1 - Secondary Terminal Lock

Release the Secondary Terminal Lock, if required (1).

Fig 3: Terminal Removal

Courtesy of CHRYSLER GROUP, LLC

1 - TYPICAL CONNECTOR

2 - PICK FROM TERMINAL REMOVER KIT 10300

3 - APEX CONNECTOR

4 - PICK FROM TERMINAL REMOVER KIT 10300

5 - AUGAT CONNECTOR

6 - ELECTRICAL TERMINAL REMOVAL TOOL

7 - MOLEX CONNECTOR

8 - PICK FROM TERMINAL REMOVER KIT 10300

9 - THOMAS AND BETTS CONNECTOR

10 - TERMINAL REMOVER

11 - CONNECTOR

12 - ELECTRICAL TERMINAL REMOVER

Position the connector locking finger away from the terminal using the proper special tool. Pull on the wire to remove the terminal from the connector.