Installation 3.0L Diesel Engine

WARNING: This page is about a different car, the 2015 RAM ProMaster 3500, 2015 RAM ProMaster 2500, and 2015 RAM ProMaster 1500. However, it is still accessible from the selected car via links, so may be relevant.

Using a lint free towel, wipe the power steering pump opening, the power steering pressure line end and the power steering pump port.
Install a new O-ring. Lubricate the O-ring with clean power steering fluid.

Fig 1: Power Steering Pump Bolts
Courtesy of CHRYSLER GROUP, LLC
Position the power steering pump in the engine and install the two power steering pump bolts (1). Tighten the power steering pump bolts to the proper specification. Refer to SPECIFICATIONS .

Fig 2: Power Steering Pressure Hose
Courtesy of CHRYSLER GROUP, LLC
Install the power steering pressure hose (1) with new washers. Tighten the power steering pressure line to the proper specification. Refer to SPECIFICATIONS .

Fig 3: Power Steering Return Hose
Courtesy of CHRYSLER GROUP, LLC
Install the power steering return hose (1).
Fill and bleed the power steering system. Refer to STANDARD PROCEDURE .
Check for leaks.