Sensor, Coolant Temperature: Installation: 3.6L

WARNING: This page is about a different car, the 2014 RAM ProMaster 3500, 2014 RAM ProMaster 2500, and 2014 RAM ProMaster 1500. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Engine Coolant Temperature (ECT) Sensor

Courtesy of CHRYSLER GROUP, LLC

Apply MOPAR® thread sealant with PFTE part number 04318034 to sensor threads.
Install the sensor (1) to the cylinder head. Tighten sensor to 11 N.m (8 ft. lbs.).
Connect the electrical connector to sensor.
If removed, install the belly pan.
Lower the vehicle.
Replace any lost engine coolant. Refer to STANDARD PROCEDURE .