Fan, Cooling: Removal: 3.6L

WARNING: This page is about a different car, the 2014 RAM ProMaster 3500, 2014 RAM ProMaster 2500, and 2014 RAM ProMaster 1500. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Coolant Recovery Bottle

Courtesy of CHRYSLER GROUP, LLC

Disconnect and isolate negative battery cable.
Drain the cooling system. Refer to STANDARD PROCEDURE .
Remove the return hose (1).
Remove the coolant recovery container (3) and position aside.

Fig 2: Front Bumper Fascia
Courtesy of CHRYSLER GROUP, LLC
Remove the front bumper fascia (1). Refer to FASCIA, FRONT, REMOVAL .

Fig 3: Upper Close Out Panel
Courtesy of CHRYSLER GROUP, LLC
Remove the upper close out panel (2) and position aside.

Fig 4: Upper Radiator Hose
Courtesy of CHRYSLER GROUP, LLC
Remove upper radiator hose (3) and position aside.

Fig 5: Cooling Fan Relays, Resistors & Cooling Fan Motors
Courtesy of CHRYSLER GROUP, LLC
Disconnect the wiring harness to the cooling fan relays (1), the resistors (2) and the cooling fan motors (3).

Fig 6: Wiring Harness
Courtesy of CHRYSLER GROUP, LLC
Separate the wiring harness (1) from the cooling fan shroud.

Fig 7: Electric Fan Connector & Clips
Courtesy of CHRYSLER GROUP, LLC
Remove the radiator fan (3) by pressing the retaining clips (2) in and lifting upwards to release from mounts.