Fan, Cooling: Installation: 3.6L

WARNING: This page is about a different car, the 2014 RAM ProMaster 3500, 2014 RAM ProMaster 2500, and 2014 RAM ProMaster 1500. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Electric Fan Connector & Clips

Courtesy of CHRYSLER GROUP, LLC

Position the radiator cooling fan (3) into mounts and attaching clips on the radiator. Press down to lock into place.

Fig 2: Wiring Harness
Courtesy of CHRYSLER GROUP, LLC
Install the harness (1) onto the cooling fan.

Fig 3: Cooling Fan Relays, Resistors & Cooling Fan Motors
Courtesy of CHRYSLER GROUP, LLC
Connect the cooling fan electrical connectors.

Fig 4: Upper Radiator Hose
Courtesy of CHRYSLER GROUP, LLC
Install upper radiator hose (3).

Fig 5: Upper Close Out Panel
Courtesy of CHRYSLER GROUP, LLC
Install the upper close out panel (2).

Fig 6: Front Bumper Fascia
Courtesy of CHRYSLER GROUP, LLC
Install the front bumper fascia (1). Refer to FASCIA, FRONT, INSTALLATION .

Fig 7: Coolant Recovery Bottle
Courtesy of CHRYSLER GROUP, LLC
Install the coolant recovery bottle (3). Tighten the bolt (6) to 12 N.m (106 in. lbs.).
Connect the negative cable.
Fill cooling system. Refer to STANDARD PROCEDURE .