LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2016 >> Durango SXT, RWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Engine Cooling System >> Engine >> Pump, Water >> Installation >> 5.7L

Pump, Water: Installation: 5.7L

Fig 1: Thermostat Housing, Water Pump, Belt Tensioner, & Idler Pulley
GC0137090Courtesy of CHRYSLER GROUP, LLC
  1. Clean mating surfaces and install water pump (3). Tighten mounting bolts to the proper specification. Refer to SPECIFICATIONS .
  2. Install upper metal heater tube.
  3. Install belt tensioner assembly (4). Refer to TENSIONER, BELT, INSTALLATION .
  4. Install idler pulley (5).
  5. Install the lower radiator hose.
  6. Install serpentine belt. Refer to BELT, SERPENTINE, INSTALLATION .
  7. Install the resonator mounting bracket.
  8. Install cooling fan assembly. Refer to FAN, COOLING, INSTALLATION .
  9. Install the upper radiator hose to the thermostat housing (1).
  10. Install the air intake assembly. Refer to BODY, AIR CLEANER, INSTALLATION, 5.7L .
  11. Connect negative battery cable.
  12. Evacuate air and refill cooling system. Refer to STANDARD PROCEDURE .
  13. Check cooling system for leaks. Refer to COOLING SYSTEM LEAKS .
scientia non olet · About LEMON Manuals