LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2016 >> Durango SXT, RWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Engine Cooling System >> Engine >> Heater, Engine Block >> Removal >> 3.6L

Heater, Engine Block: Removal: 3.6L

Fig 1: A/C Compressor & Fasteners
GC0145963Courtesy of CHRYSLER GROUP, LLC
  1. Remove the A/C compressor (1) and position aside. Refer to COMPRESSOR, A/C, REMOVAL .
    Fig 2: Block Heater & Screw
    GC0144482Courtesy of CHRYSLER GROUP, LLC
  2. Drain the cooling system. Refer to STANDARD PROCEDURE .
  3. Disconnect the power cord plug from the engine block heater (1).
  4. Remove the bolt (2) and the engine block heater assembly (1).
scientia non olet · About LEMON Manuals