Heater, Engine Block: Installation: 3.6L

WARNING: This page is about a different car, the 2015 Dodge Durango. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Block Heater & Screw -- 3.6L Engine

Courtesy of CHRYSLER GROUP, LLC

Clean block core hole and heater seat.
Install the engine block heater (1). Tighten the bolt (2) to 12 N.m (9 ft. lbs.).
Connect the power cord plug to the engine block heater (1).
Fill the cooling system. Refer to STANDARD PROCEDURE .

Fig 2: A/C Compressor & Fasteners
Courtesy of CHRYSLER GROUP, LLC
Install the A/C compressor. Refer to COMPRESSOR, A/C, INSTALLATION .