LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2016 >> Challenger SXT Plus >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Engine Cooling System >> Engine >> Fan, Cooling >> Removal >> 6.2L Single Fan

6.2L Single Fan

NOTE:

If replacing the fan blades. The dual fan blades can be replaced separately from the motor. Single motor fan blades are balanced to the motor and must be replaced as a fan/motor assembly.

  1. Disconnect and isolate the negative battery cable.
  2. Remove the water pump. Refer to PUMP, WATER, REMOVAL .
    Fig 1: Cooling Fan Wire Harness Connector & Bolts
    GC0170286Courtesy of CHRYSLER GROUP, LLC
  3. Disconnect the cooling fan wire harness connector (2).
  4. Remove the bolts (1) and the cooling fan assembly.
scientia non olet · About LEMON Manuals