LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2015 >> Journey Limited, AWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Engine Cooling System >> Engine >> Sensor, Coolant Temperature >> Removal >> 2.4L >> Cylinder Block Mounted

Cylinder Block Mounted

Fig 1: ECT Sensor
GC0128547Courtesy of CHRYSLER GROUP, LLC
1 - ECT
  1. Disconnect and isolate the negative battery cable.
  2. Drain the cooling system Refer to STANDARD PROCEDURE .
  3. Disconnect the Engine Coolant Temperature (ECT) sensor wire harness connector (1).
  4. Remove the ECT sensor.
scientia non olet · About LEMON Manuals