Heater, Engine Block: Installation: 2.4L

Fig 1: Block Heater 2.4L Engine

Courtesy of CHRYSLER GROUP, LLC

1 - RETAINING CLIP

2 - BLOCK HEATER

CAUTION:

To prevent damage, the power cord must be secured in it's retaining clips, and not positioned so it could contact linkages or exhaust manifold.

Thoroughly clean the engine block heater bore.
Install the engine block heater (2) and the retainer clip (1). Make sure retaining clip (1) is engaged.
Connect the power cord to the engine block heater (2).
Remove the support and lower the vehicle.