6.4L Dual Fan

Fig 1: Fan Motor Wiring Harness, Fan Shroud, Fan Blade & Bolts

Courtesy of CHRYSLER GROUP, LLC

Install the fan blade (4) to fan motor. Tighten nut (3) to the proper torque specification. Refer to SPECIFICATIONS .
Install the fan motor assembly to the shroud (6). Tighten the nut (3) to the proper torque specification. Refer to SPECIFICATIONS .
Route the fan motor wiring harness (5) through the fan shroud (6).

Fig 2: Radiator Cooling Fan Assembly & Radiator Mounts
Courtesy of CHRYSLER GROUP, LLC
Install the cooling fan assembly (1) into the lower radiator mounts (2).

Fig 3: Cooling Fan Electrical Connector, Cooling Fan Mounting Bolts & Radiator Cooling Fan Assembly
Courtesy of CHRYSLER GROUP, LLC
Install cooling fan mounting bolts (2). Tighten to the proper torque specification. Refer to SPECIFICATIONS .
Connect the cooling fan wire harness connector (1).

Fig 4: Upper Radiator Hose, Clamp, Oil Cooler Return Line Hose & Clamp
Courtesy of CHRYSLER GROUP, LLC
Install the upper radiator hose (2).
Install the oil cooler supply line (4) to the thermostat housing.
Install the throttle body. Refer to THROTTLE BODY, INSTALLATION .
Install the air cleaner body. Refer to BODY, AIR CLEANER, INSTALLATION .
Fill the cooling system. Refer to STANDARD PROCEDURE .
Operate the engine until it reaches normal operating temperature.