LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2015 >> Challenger SXT Plus >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Engine Cooling System >> Engine >> Fan, Cooling >> Installation >> 3.6L Single Fan

3.6L Single Fan

NOTE:

If replacing the fan blades. The dual fan blades can be replaced separately from the motor. Single motor fan blades are balanced to the motor and must be replaced as a fan/motor assembly.

Fig 1: Radiator Cooling Fan Assembly & Radiator Mounts
GC0144489Courtesy of CHRYSLER GROUP, LLC
CAUTION:

When installing the cooling fan assembly. Care must be used so that the fan shroud does not contact the radiator or the radiator fins. Damaged may  cause leaking.

  1. Position the radiator cooling fan assembly (1) in vehicle.
    Fig 2: Cooling Fan Electrical Connector & Upper Cooling Fan Mounting Bolts
    GC0144488Courtesy of CHRYSLER GROUP, LLC
  2. Install the cooling fan bolts (3) and tighten to the proper torque specification. Refer to SPECIFICATIONS .
  3. Connect cooling fan wire harness connector (1).
  4. Install the air cleaner body. Refer to BODY, AIR CLEANER, INSTALLATION .
  5. Connect the negative battery cable.
  6. Operate engine until it reaches normal operating temperature. Check the fan for proper operation.
scientia non olet · About LEMON Manuals