3.6L Dual Fan

Fig 1: Fan Motor Wiring Harness, Fan Shroud, Fan Blade & Bolts

Courtesy of CHRYSLER GROUP, LLC

Install the fan blade (4) to the fan motor. Tighten the nut (3) to the proper torque specification. Refer to SPECIFICATIONS .
Install the fan motor assembly to the shroud (6). Tighten nut (3) to the proper torque specification. Refer to SPECIFICATIONS .
Route the fan motor wiring harness (5) through the fan shroud (6).

Fig 2: Radiator Cooling Fan Assembly & Radiator Mounts
Courtesy of CHRYSLER GROUP, LLC
Install the cooling fan assembly (1) into the lower radiator mounts (2).

Fig 3: Cooling Fan Electrical Connector, Cooling Fan Mounting Bolts & Radiator Cooling Fan Assembly
Courtesy of CHRYSLER GROUP, LLC
Install the cooling fan bolts (2) and tighten to the proper torque specification. Refer to SPECIFICATIONS .
Connect the cooling fan wire harness connector (1).
Install the air cleaner body. Refer to BODY, AIR CLEANER, INSTALLATION .
Connect the negative battery cable.
Operate engine until it reaches normal operating temperature.