LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2015 >> Challenger SXT Plus >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Front Suspension & Wheel Alignment >> Front >> Sensor, Active Damping >> Installation >> Rear

Sensor, Active Damping: Installation: Rear

NOTE:

Installation process is the same for both sides of the vehicle.

Fig 1: Rear ADS Sensor Nuts, Connector & Sensor
GC0170503Courtesy of CHRYSLER GROUP, LLC
  1. Install the bracket (2) and place the studs through the holes in the rear shock tower.
  2. Install the rear Active Damping System (ADS) sensor nuts (1) and tighten to the proper specification. Refer to FRONT, SPECIFICATIONS .
  3. Connect the wiring harness connector (3) to the ADS sensor (4) and seat the terminal locking tab.
scientia non olet · About LEMON Manuals