LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2015 >> Challenger SXT Plus >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Front Suspension & Wheel Alignment >> Front >> Sensor, Active Damping >> Installation >> Front

Sensor, Active Damping: Installation: Front

NOTE:

Installation process is the same for both sides of the vehicle.

Fig 1: Damping Sensor, Connector & Bolt
GC0170152Courtesy of CHRYSLER GROUP, LLC
  1. Position the sensor (2), install the front Active Damping System (ADS) sensor bolt (3) and tighten to the proper specification. Refer to FRONT, SPECIFICATIONS .
  2. Connect the wiring harness connector (1) and seat the terminal locking tab.
scientia non olet · About LEMON Manuals