Solenoid, Variable Valve Timing: Removal: Left

Disconnect and isolate the negative battery cable.

Fig 1: Engine Cover
Courtesy of CHRYSLER GROUP, LLC
Remove the engine cover (1).
Remove the air cleaner body. Refer to BODY, AIR CLEANER, REMOVAL for 3.6L, BODY, AIR CLEANER, REMOVAL for 5.7L, BODY, AIR CLEANER, REMOVAL for 6.2L or BODY, AIR CLEANER, REMOVAL for 6.4L.

Fig 2: Variable Valve Timing Solenoids, Connectors & Bolts
Courtesy of CHRYSLER GROUP, LLC

NOTE:
Mark the Variable Valve Timing Solenoid (VVTS) wire harness connectors (1) with a paint pen or equivalent so that they may be reinstalled in their original locations.
Mark the intake VVTS (4) and the VVTS (2) with a paint pen or equivalent so that they may be reinstalled in their original locations.
Disconnect the VVTS wire harness connector (1).
Remove the bolts (3) and pull the VVTS from the cylinder head cover.

Fig 3: VVT Seal
Courtesy of CHRYSLER GROUP, LLC
The seal (1) can be reused if not damaged.