Solenoid, Variable Valve Timing: Installation: Left

Fig 1: VVT Seal

Courtesy of CHRYSLER GROUP, LLC

Install the Variable Valve Timing Solenoid (VVTS) seals (1). The seals can be reused if not damaged.

Fig 2: Variable Valve Timing Solenoids, Connectors & Bolts
Courtesy of CHRYSLER GROUP, LLC
Refer to the markings made at disassembly and install the intake VVTS (4) and the exhaust VVTS (2) in their original locations.
Install the VVTS. Tighten bolts (3) to the proper torque specifications. Refer to SPECIFICATIONS .
Connect the VVTS wire harness connector (1).
Install the air cleaner body. Refer to BODY, AIR CLEANER, INSTALLATION for 3.6L, BODY, AIR CLEANER, INSTALLATION for 5.7L, BODY, AIR CLEANER, INSTALLATION for 6.2L or BODY, AIR CLEANER, INSTALLATION for 6.4L.

Fig 3: Engine Cover
Courtesy of CHRYSLER GROUP, LLC
Install the engine cover (1).
Connect the negative battery cable.

NOTE:

The Cam/Crank Variation Relearn procedure must be performed using the scan tool anytime there has been a repair/replacement made to a powertrain system, for example: flywheel, valvetrain, camshaft and/or crankshaft sensors or components.