Bank 1

Fig 1: TMAP Sensor, Connector & Screw

Courtesy of CHRYSLER GROUP, LLC

Check condition of Temperature and Manifold Absolute Pressure (TMAP) sensor O-ring seal.
Clean the sealing area on the supercharger.
Lubricate the TMAP sensor O-ring seal with clean engine oil.
Install the TMAP sensor (2) into the supercharger. Tighten the screw (3) to the proper torque specification. Refer to FUEL INJECTION, GAS, SPECIFICATIONS .
Connect the TMAP sensor wire harness connector (1).

Fig 2: Disconnecting/Connecting PCV Hose
Courtesy of CHRYSLER GROUP, LLC
Position the PCV hose (2) and connect it to the supercharger.
Connect the negative battery cable.