LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2014 >> Charger SRT-8 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Front Axle) >> Disconnect, Front Axle >> Installation >> Front Axle Disconnect

Front Axle Disconnect

WARNING: This page is about a different variant/trim than selected.
Fig 1: Left Drive Axle & Intermediate Shaft
GC0081408Courtesy of CHRYSLER GROUP, LLC
  1. Install the front axle disconnect (3).
  2. Install and torque the four front axle disconnect-to-oil pan bolts (1) to 25 N.m (18 ft. lbs.).
    Fig 2: Installing Front Axle Disconnect Solenoid And Bolts
    GC0095014Courtesy of CHRYSLER GROUP, LLC
  3. Install the front axle disconnect solenoid (8), and the 3 bolts (5), (6) and (7).
    Fig 3: Front Axle Disconnect Solenoid Harness Connector
    GC0095013Courtesy of CHRYSLER GROUP, LLC
  4. Connect the front axle disconnect solenoid harness connector (1).
    Fig 4: Removing Bolts From Front Axle Disconnect Bracket Bolts
    GC0095015Courtesy of CHRYSLER GROUP, LLC
  5. Install the front axle disconnect solenoid bracket (4), and the 3 bolts (1), (2), and (3).
scientia non olet · About LEMON Manuals