LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2014 >> Charger R/T, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 249 (Exhaust System) >> Sensor, Differential Pressure >> Removal >> Diesel

Sensor, Differential Pressure: Removal: Diesel

WARNING: This page is about a different car, the 2013 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Raise and support vehicle. Refer to HOISTING, STANDARD PROCEDURE .
    Fig 1: Differential Pressure Sensor Wire Harness Connector, Zip Tie, Differential Pressure Sensor Hoses, Nut & Differential Pressure Sensor
    GC0152165Courtesy of CHRYSLER GROUP, LLC
  3. Disconnect the differential pressure sensor wire harness connector (1).
  4. Remove the zip tie (5) securing the differential pressure sensor hoses (4).
  5. Disconnect the differential pressure sensor hoses (4).
  6. Remove nut (2) and the differential pressure sensor (3).
scientia non olet · About LEMON Manuals