Control Circuit Testing
WARNING: This page is about a different car, the 2012 Dodge Journey. However, it is still accessible from the selected car via links, so may be relevant.
The starter control circuit components should be tested in the order in which they are listed, as follows:
- Starter Relay - Refer to Starter Relay The starter relay is located within the PDC. Refer to DIAGNOSIS AND TESTING .
- Starter Solenoid - Refer to DIAGNOSIS AND TESTING Diagnosis and Testing.
- Ignition Switch - Refer to appropriate information on Ignition Switch and Key Lock Cylinder
- Clutch Pedal Position Switch - If equipped with manual transmission, refer to appropriate information on Clutch Pedal Position Switch .
- Park/Neutral Position Switch - If equipped with automatic transmission, refer to appropriate information on Park/Neutral Position Switch .
- Wire harnesses and connections - Refer to appropriate Wiring Diagrams.