Pedal, Accelerator: Removal: Removal

The Accelerator Pedal Position Sensor (APPS) and the accelerator pedal is serviced as a complete assembly including the bracket.

Fig 1: Negative Battery Cable

Courtesy of CHRYSLER GROUP, LLC

1. Disconnect the negative battery cable (1).
   Fig 2: Removal & Installation Of Accelerator Pedal W/Apps

   Courtesy of CHRYSLER GROUP, LLC
2. Disconnect the electrical connector (3) at the APPS (6).
3. Remove the two accelerator pedal retaining bracket nuts (4) and remove the accelerator pedal assembly (2) from the mounting studs (1).