Section 1647 (Brake System - General Information): Specifications
WARNING: This page is about a different car, the 2012 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
MATERIAL SPECIFICATIONS
| Item | Specification | Fill Capacity |
|---|---|---|
| High Performance DOT 3 Motor Vehicle Brake Fluid PM-1-C (US); CPM-1-C (Canada) |
WSS-M6C62-A or WSS-M6C65-A1 | 960 ml (2 pt) |
| High Temperature Nickel Anti-Seize Lubricant XL-2 |
ESE-M12A4-A | - |
| Metal Brake Parts Cleaner PM-4-A or PM-4-B (US); CPM-4 (Canada) |
- | - |
| Silicone Brake Caliper Grease and Dielectric Compound XG-3-A |
ESE-M1C171-A | - |
GENERAL SPECIFICATIONS
| Item | Specification |
|---|---|
| Front Brake Disc | |
| Brake disc minimum thickness | 24 mm (0.944 in) |
| Brake pad maximum taper wear (in any direction) | 3.0 mm (0.118 in) |
| Brake pad minimum thickness | 3.0 mm (0.118 in) |
| Rear Drum Brake | |
| Brake drum maximum diameter | 256.3 mm (10.090 in) |
| Brake shoe minimum thickness | 1.0 mm (0.039 in) |
TORQUE SPECIFICATIONS
| Description | Nm | lb-ft | lb-in |
|---|---|---|---|
| Brake caliper bleeder screw | 16 | - | 142 |
| Master cylinder bleeder screw (non-hybrid vehicles) | 3 | - | 27 |
| Master cylinder brake tube fittings | 25 | 18 | - |
| Wheel cylinder bleeder screw | 5 | - | 44 |