Negative - Engine Compartment

Fig 1: Fastener Securing Negative Battery Cable To Transmission Housing

Courtesy of CHRYSLER GROUP, LLC

Position the battery negative cable in the engine compartment.
Raise the vehicle on hoist.
Install the fastener securing the battery negative cable to the transmission housing. Tighten the bolt to 11 N.m (8 ft. lbs.).
One at a time, install the battery cable retaining pushpins, fasteners and routing clips until the cable is installed exactly where it was in the vehicle.
Lower the vehicle.

Fig 2: Fastener Securing Negative Battery Cable To Right Front Strut Tower
Courtesy of CHRYSLER GROUP, LLC
Install the fastener securing the battery negative cable to the right front strut tower.
Connect the battery negative cable. Follow the battery connection procedure.
Install the spare tire cover.