LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2013 >> C/V Tradesman >> Repair and Diagnosis >> Engine Performance >> Ignition System (Service Information) >> Capacitor, Ignition >> Installation >> Installation

Capacitor, Ignition: Installation: Installation

Fig 1: Electrical Connector, Mounting Bolt & Ignition Coil Capacitor
GC0144203Courtesy of CHRYSLER GROUP, LLC
  1. Install the ignition coil capacitor (2) and bolt (3). Tighten the bolt to 10 N.m (89 in. lbs.).
  2. Connect the electrical connector (1).
  3. Connect the negative battery cable and tighten nut to 5 N.m (45 in. lbs.).
scientia non olet · About LEMON Manuals