LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2012 >> Journey R/T, AWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Engine Cooling System >> Engine >> Sensor, Coolant Temperature >> Installation >> 2.0L Diesel

2.0L Diesel

Fig 1: Engine Coolant Temperature (ECT) Sensor
GC0147931Courtesy of CHRYSLER GROUP, LLC
  1. Apply MOPAR™ thread sealant with PFTE part number 04318034 to sensor threads.
  2. Install sensor (2) to cylinder head.
  3. Tighten sensor to 11 N.m (97 in. lbs.).
  4. Connect electrical connector to sensor.
  5. Install the engine cover.
  6. Replace any lost engine coolant. Refer to STANDARD PROCEDURE .
scientia non olet · About LEMON Manuals