LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2012 >> Durango R/T, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 18 (Electronic Control Modules (Service Information)) >> Module, Compass >> Installation >> Installation

Module, Compass: Installation: Installation

WARNING: This page is about a different car, the 2012 Dodge Caliber. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Remote Compass Module
GC0102610Courtesy of CHRYSLER GROUP, LLC
NOTE:

RHD model shown in illustration. LHD model similar.

  1. Position the Remote Compass Module (RCM) (5) on top of the instrument panel.
  2. Install the screws (6) that secure the RCM to the instrument panel.
  3. Connect the RCM electrical connector (1).
  4. Install the instrument panel top cover. Refer to COVER, INSTRUMENT PANEL, INSTALLATION .
  5. Connect the battery negative cable.
scientia non olet · About LEMON Manuals