LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2012 >> Durango R/T, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 13 (Engine Cooling System) >> Engine >> Pump, Water, AFTERRUN >> Installation >> Installation

Pump, Water, AFTERRUN: Installation: Installation

WARNING: This page is about a different car, the 2012 Dodge Caliber. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Water Pump Afterrun
GC0102554Courtesy of CHRYSLER GROUP, LLC
  1. Position the after run pump (2) onto the mounting brcaket (3).
  2. Connect the two coolant hoses (4) to the after run pump (2).
  3. Connect the after run pump electrical connector (1).
  4. Install the air cleaner housing. Refer to BODY, AIR CLEANER, INSTALLATION .
  5. Install the negative battery cable.
  6. Fill the cooling system Refer to STANDARD PROCEDURE .
scientia non olet · About LEMON Manuals