LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2012 >> Caliber SE >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel System >> Fuel Injection, Diesel >> Sensor, Fuel Temperature >> Removal >> Removal

Sensor, Fuel Temperature: Removal: Removal

Fig 1: Quarter Turn Lock Tabs & Air Inlet Duct
GC0137828Courtesy of CHRYSLER GROUP, LLC
  1. Remove the engine cover.
  2. Remove air inlet duct (2).
  3. Disconnect the negative battery cable.
  4. Remove cooling fan assembly. Refer to FAN, COOLING, REMOVAL .
    Fig 2: Bolts & Heat Shield
    GC0137974Courtesy of CHRYSLER GROUP, LLC
  5. Remove bolts (1) and the heat shield (2).
    Fig 3: Fuel Temperature Sensor Harness Connector
    GC0138005Courtesy of CHRYSLER GROUP, LLC
  6. Disconnect the fuel temperature sensor harness connector (2).
  7. Remove the fuel temperature sensor (1).
  8. Remove and discard sealing washer and O-ring.
scientia non olet · About LEMON Manuals