LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2012 >> C/V >> Repair and Diagnosis >> External Pages >> Different car >> Section 81 (Electronic Control Modules (Service Information)) >> Module, Final Drive Control >> Installation >> Installation

Module, Final Drive Control: Installation: Installation

WARNING: This page is about a different car, the 2012 Dodge Avenger and 2012 Chrysler 200. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install ECC module into mounting studs.
  2. Install mounting nuts and tighten to 8N.m (71 in. lbs.) torque.
  3. Install the electrical connector.
  4. Install the left front trim panel.
scientia non olet · About LEMON Manuals