Steering System: Pump: Installation: 3.7L
Courtesy of CHRYSLER LLC
| 1 - MOUNTING BOLTS |
| 2 - RESERVOIR |
| 3 - STEEL PULLEY |
- Install the pump to the vehicle.
- Install the three bolts (1) securing the pump to the engine. Tighten the bolts to 28 N.m (21 ft. Refer to Fig 1.lbs.).
- Install the power steering hoses. Tighten to 27 N.m (20 ft.lbs.).
- Install the serpentine belt. Refer to BELT, SERPENTINE, INSTALLATION
or BELT, SERPENTINE, POWER STEERING, INSTALLATION
.
- Refill the power steering fluid and check for leaks. Refer to STANDARD PROCEDURE .