LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2011 >> Nitro Detonator, 4WD >> Repair and Diagnosis >> Engine Performance >> System >> DTCS P0585 To P2110 >> Diagnosis And Testing >> P0602-Control Module Programming Error/Not Programmed >> Theory Of Operation

Theory Of Operation

The controller is programmed during manufacturing with generic software to facilitate testing. However, generic software does not have the proper calibrations to control a transmission in a vehicle. The check for generic software is made at power-up. If generic software is found, the MIL will light immediately and the MIL will stay on even if the fault is cleared, until the proper software is installed. Note: Transmission will be placed in limp-in mode.