LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2011 >> Journey R/T, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 20 (Electronic Control Modules (Service Information)) >> Module, Powertrain Control >> Installation >> Installation >> Left Hand Drive

Left Hand Drive

WARNING: This page is about a different car, the 2011 Dodge Nitro. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: PCM, Screws & Electrical Connectors
GC0138954Courtesy of CHRYSLER LLC
  1. Position the PCM (1) into the vehicle.
  2. Install the PCM mounting screws (3). Tighten screws to 8 N.m (71 in. lbs.).
  3. Connect the PCM electrical connectors (2).
  4. Connect the negative battery cable. Tighten nut to 5 N.m (45 in. lbs.).
scientia non olet · About LEMON Manuals