Module, Totally Integrated Power (TIPM): Removal: Removal

WARNING: This page is about a different car, the 2011 Dodge Nitro. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying TIPM Positive Cable Retaining Nut, Cable, Mounting Stud & Totally Integrated Power Module (TIPM) Cover

Courtesy of CHRYSLER LLC

Open hood.
Disconnect and isolate the battery negative cable.
Open the Totally Integrated Power Module (TIPM) cover (4).
Remove the TIPM positive cable retaining nut (1) and remove the cable (2) from the mounting stud (3).

Fig 2: Identifying Integrated Power Module (TIPM), TIPM Mounting Bracket & Mounting Tabs
Courtesy of CHRYSLER LLC
Using an appropriate flat bladed tool, depress the four mounting clips to disengage and remove the TIPM housing (1) from the TIPM bracket mounting tabs (3).

Fig 3: TIPM Housing & Wire Harness Connectors
Courtesy of CHRYSLER LLC
Disconnect each of the seven TIPM wire harness connectors from the TIPM housing (2).
Remove the TIPM from the vehicle.