LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2011 >> Journey Express >> Repair and Diagnosis >> Engine Performance >> Ignition System (Service Information) >> Sensor, Camshaft Position >> Removal >> 2.4L Rear

2.4L Rear

Fig 1: Rear Cam Sensor Shield Installed
GC0082376Courtesy of CHRYSLER LLC
  1. Disconnect and isolate negative battery cable.
  2. Disconnect electrical connector at sensor.
  3. Remove nut retaining heat shield.
    Fig 2: Rear Cam Sensor Shield Removed
    GC0082377Courtesy of CHRYSLER LLC
  4. Pull heat shield out to uncover sensor.
  5. Remove mounting bolt.
    Fig 3: Cam Sensor
    GC0082375Courtesy of CHRYSLER LLC
  6. Remove sensor.
scientia non olet · About LEMON Manuals