2.4L Front

Fig 1: Cam Sensor

Courtesy of CHRYSLER LLC

CAUTION:

Install camshaft position (CMP) sensor utilizing twisting motion. Make sure CMP sensor is fully seated. Do not drive CMP sensor into the bore with mounting screw. This may cause CMP sensor to be incorrectly seated causing a faulty signal or no signal at all.

Lubricate sensor O-ring.

Fig 2: Front Cam Sensor
Courtesy of CHRYSLER LLC
Install CMP sensor and mounting bolt, tighten to 9 N.m (79.5 in. lbs.).
Connect electrical connector to camshaft position sensor.
Connect negative battery cable, tighten nut to 5 N.m (45 in. lbs.).