Charging System (Service Information): Generator: Installation: 2.8L

Fig 1: Generator 2.8L

Courtesy of CHRYSLER LLC

1. Position generator (2) to engine and install four mounting bolts (3) and (1). Tighten all bolts to 28 N.m (21 ft. lbs.).
   Fig 2: Alternator/Generator Electrical Connection

   Courtesy of CHRYSLER LLC
2. Connect field wire connector (4) into generator.
3. Install B+ terminal (2) and nut (3) to generator mounting stud. Tighten nut to 13 N.m (115 in. lbs.)
4. Snap plastic protective cover (1) to B+ terminal.
5. Install drive belt. Refer to BELT, SERPENTINE, INSTALLATION .
6. Connect the negative battery cable, tighten the nut to 5 N.m (45 in. lbs.).