Section 141 (Steering System): Pump: Installation: 3.7L
WARNING: This page is about a different car, the 2011 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
| 1 - MOUNTING BOLTS |
| 2 - RESERVOIR |
| 3 - STEEL PULLEY |
- Install the pump to the vehicle.
- Install the three bolts (1) securing the pump to the engine. Tighten the bolts to 28 N.m (21 ft. Refer to Fig 1.lbs.).
- Install the power steering hoses. Tighten to 27 N.m (20 ft.lbs.).
- Install the serpentine belt. Refer to BELT, Serpentine, Installation .
- Refill the power steering fluid and check for leaks. Refer to Standard Procedure .