Cooling Fan - Installation
Courtesy of CHRYSLER LLC
- Install the upper shroud cover (1). Apply pressure downwards until the cover snaps into place past clips (2).
- Install cooling fan assembly into vehicle.
- Guide the fan/shroud cover assembly into position between the radiator and upper core support.
Courtesy of CHRYSLER LLC
- Position cooling fan assembly onto the mounts (3) located on the radiator.
- Lock in the fan (1) assembly into place by pressing down firmly on the shroud till the locks (3) engage.
- Connect electric fan electrical connector (2).
- Raise the vehicle.
- Install the lower cooling shroud cover by applying upwards pressure till the cover snaps into place onto the cooling fan shroud.
- If equipped, install the lower engine cover.
- Lower vehicle.
- Connect negative battery cable.
- Install the air intake assembly.
- Start engine and check fan operation.