Sensor, Camshaft Position: Removal: 5.7L

Fig 1: Camshaft Position Sensor-5.7L

Courtesy of CHRYSLER LLC

The Camshaft Position Sensor (CMP) (1) is located on the right side of the timing cover (2) near the engine thermostat housing.

1. Disconnect the air cleaner and resonator assembly. Refer to BODY, AIR CLEANER, REMOVAL or BODY, AIR CLEANER, REMOVAL, 5.7L .
2. Disconnect the electrical connector (4) at the CMP sensor (1).
   Fig 2: CMP Sensor Removal/Installation - 5.7L V8

   Courtesy of CHRYSLER LLC
3. Remove the CMP sensor retaining bolt (3).
4. Using a slight rocking motion, carefully remove the CMP sensor (2) from the timing cover (1).
5. Check the condition of CMP sensor O-ring, replace as necessary.