Sensor, Air Temperature, Intake: Removal: 3.6L

Fig 1: Engine Cover

Courtesy of CHRYSLER LLC

1. Disconnect and isolate the negative battery cable.
2. Remove the engine cover (1).
   Fig 2: Electrical Connector

   Courtesy of CHRYSLER LLC
3. Disconnect the electrical connector (1) from the inlet air temperature (IAT) sensor.
   Fig 3: View Of IAT Sensor Tab/O-ring - 3.7L/4.7L/5.7L

   Courtesy of CHRYSLER LLC
4. Clean dirt from the air inlet tube at the IAT sensor base.
5. Gently lift the small plastic release tab (3), rotate the sensor about 1/4 turn counter-clockwise and remove the sensor from the inlet air hose.
6. The IAT sensor O-ring (2) can be reused if not damaged.