LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2011 >> Charger Rallye, Gas >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Engine Cooling System >> Engine >> HEATER, Engine Block >> Installation >> 5.7L Block Heater - Installation

5.7L Block Heater - Installation

Fig 1: Wire harness
GC0145074Courtesy of CHRYSLER LLC
  1. Thoroughly clean cylinder block core hole and block heater seat.
  2. Insert block heater assembly (2) into the block.
  3. With block heater (2) fully seated, tighten bolt to 2 N.m (17 in. lbs.) torque.
  4. Connect power cord (1) to block heater assembly (2).
scientia non olet · About LEMON Manuals