CAPACITOR, Ignition: Installation: 5.7L

Fig 1: Capacitor - 6.1L

Courtesy of CHRYSLER LLC

1. Position the ignition capacitor (2) to the rear of the left cylinder head.
2. Install the retaining bolt and tighten to 10 N.m (7 ft. lbs.).
3. Install the ignition capacitor electrical connector (1).
   Fig 2: Negative Battery Cable

   Courtesy of CHRYSLER LLC
4. Connect the negative battery cable and tighten nut (1) to 5 N.m (45 in. lbs.).