PEDAL, Accelerator: Removal: Removal

Fig 1: Negative Battery Cable

Courtesy of CHRYSLER LLC

Disconnect the negative battery cable (1).

Fig 2: Cable Attachment To Accelerator Module
Courtesy of CHRYSLER LLC
If equipped with adjustable pedals, remove the adjuster cable (1) at accelerator pedal adjuster motor (2).

Fig 3: Accelerator Pedal Adjuster Motor & Electrical Connectors
Courtesy of CHRYSLER LLC

CAUTION:
Do not attempt to separate or remove the Accelerator Pedal Position Sensor (APPS) from the accelerator pedal assembly. The APPS and the accelerator pedal is replaced as an assembly. If the sensor is removed from the pedal, the electronic calibration may be destroyed.
Disconnect the electrical connector at the accelerator pedal adjuster motor (1).
Disconnect both electrical connectors at the APPS (2).

Fig 4: 3 Retaining Nuts & Pedal Assembly
Courtesy of CHRYSLER LLC
Remove the pedal assembly 3 retaining nuts (2, 3).
Remove the pedal assembly (1).