Charging System (Service Information): Generator: Removal: 6.4L
WARNING:
Disconnect the negative battery cable before removing the battery output wire (B+ wire) from the generator. Failure to do so can result in injury or damage the electrical system.
- Disconnect and isolate the negative battery cable (1).
- Rotate the accessory drive belt tensioner (7) clockwise until it contacts it's stop and remove the accessory drive belt (4), then slowly rotate the tensioner into the freearm position.
- Raise and support the vehicle.
- Remove the belly pan retainers (1) and remove the belly pan.
- Remove the transmission cooler line retaining clamp (1) at the right crossmember (3) and position the transmission cooler line (2) aside.
- Depress the field wire connector tab (1) at the rear of the generator and disconnect the field wire connector.
- Remove the insulator cover (2) from B+ output terminal at the rear of the generator.
- Remove the B+ terminal retaining nut (3) at the rear of the generator and remove the B+ terminal.
- Remove the generator support bracket to engine mount retaining nut (1).
- Remove the generator support bracket retaining bolt (2) and remove the support bracket (3).
- Unsnap the plastic insulator cap from B+ output terminal at the rear of the generator.
- Remove the B+ terminal retaining nut at the rear of the generator and remove the B+ terminal.
- Depress the field wire connector tab at the rear of the generator and disconnect the field wire connector.
- Remove the remaining lower generator retaining bolt (1).
- Lower the vehicle.
- Remove the upper generator retaining bolt (1) and remove the generator (2) from the vehicle.