LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2011 >> Caliber Heat, Standard >> Repair and Diagnosis >> Body & Frame >> Windows >> Power Windows (Service Information) >> MOTOR, Window Regulator >> Installation >> Installation

MOTOR, Window Regulator: Installation: Installation

  1. With regulator on bench, install four screws retaining the motor to the regulator.
  2. Install the window regulator.
  3. Connect the electrical harness connector to window motor.
  4. Install the door module. Refer to PANEL, Door Trim, Bolster, Installation .
  5. Connect battery negative cable.
scientia non olet · About LEMON Manuals