LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2011 >> Avenger Heat >> Repair and Diagnosis >> Engine Performance >> Ignition System (Service Information) >> Capacitor, Ignition >> Installation >> 2.0, 2.4L

2.0, 2.4L

Fig 1: Ignition Capacitor
GC0084713Courtesy of CHRYSLER LLC
  1. Install ignition coil capacitor (2) and bolt (3), tighten bolt to 10 N.m (88.5 ft. lbs.).
  2. Connect electrical connector (1).
  3. Connect the negative battery cable, tighten the nut to 5 N.m (45 in. lbs.).
scientia non olet · About LEMON Manuals